How do I unbox my Gold Series 6G speakers?

Before you unpack your loudspeakers, please make sure that there is plenty of clean floor area available.

WARNING: DO NOT attempt to lift any of the loudspeakers alone. The recommended number of people is printed on the outer carton.

Gold 50, 100 & C250 6G

1. Open the top of the box and remove the cap with the accessories.
2. Lift the speaker(s) out of the box and the remaining end cap.
3. Remove the protective bag.

Gold 300 & 500 6G

1. Open the top of the box and remove the end cap with the accessories. The end cap is used as a jig for assembly of the base plate, outriggers, and feet. Ensure to remove all accessories before construction.
2. Position the outriggers in the end cap; they will form an ‘X’ formation from the corners of the base, which is then placed onto the outriggers and bolted together using the supplied bolts (M5). Once assembled, remove the base and put the end cap back in the box.
3. Flip the box over and lift up the outer carton.
4. Remove the base end cap (which will currently be facing upwards) and fit the assembled base plate to the speaker using the supplied bolts (M10).
5. Flip over the speaker once more to return it to normal orientation.
6. Remove the remaining end cap and the protective bag.

If you were unable to find an answer to your query in our Gold Series 6G support section or you require any further assistance, please contact our technical team via email at [e-mail] or give us a call on [phone].